Your Raspberry Pi will now use the 64-bit Raspberry Pi OS and be able to run 64-bit Linux applications with the ARM64 (aka AArch64) architecture. With the 64-bit operating system written to the microSD card, insert it into the Raspberry Pi and boot. Your Raspberry Pi will now use the 64-bit Raspberry Pi OS and be able to run 64-bit applications, such as How to use Raspberry Pi OS 64-bit Once done, remove the microSD card, then insert it into the Raspberry Pi and boot it up. Note that this will delete any existing data on it. Click Write to write the operating system image to the microSD card.Click Choose Storage and select your attached microSD card (usually named 'Generic Storage Device Media').Choose Raspberry Pi OS (64-bit) or Raspberry Pi OS Lite (64-bit) - Lite version without desktop interface.Click Choose OS, then select Raspberry Pi OS (other).Thankfully, the 64-bit Raspberry Pi OS is now fully loaded into the menu of the official Raspberry Pi Imager microSD card recording utility.Īfter downloading and installing the latest version of Raspberry Pi Imager on another computer, open it and do the following: Previously, if you wanted to try the beta version of the 64-bit Raspberry Pi operating system, you needed to download its image file from an archive. How to install Raspberry Pi OS 64-bit version You can then download and use the official Raspberry Pi Imager tool on another computer and select the 64-bit version of Raspberry Pi OS (standard or Lite) in the menu to record to the inserted microSD card. In addition, you also need a microSD card with at least 8GB of storage to install the operating system. To get started, you will need a Raspberry Pi model with a 64-bit processor: Server Version: version.In today's post, TipsMake will look at the advantages and disadvantages, as well as some use cases for the 64-bit version of Raspberry Pi OS. That is, download the file ubuntu-19.10.1-preinstalled-server-arm64+ and extract the image like $ kubectl versionĬlient Version: version.Info Install the Operating System on the SD cardsĭownload a 64bit Linux OS. Open up the disk utility app and erase/format the SD cards using the MS-DOS (FAT) format:Ģ. below), so you may end up using different tools if you’re carrying out these steps in a different environment, say Linux or Windows. Note that I’m using macOS as the host operating system, that is, where I prepare the SD cards and install the RPI OS (steps 1. In the following we walk through how to set up the RPI operating system (OS) and Kubernetes. Note that it’s a fully portable setup, that is, the only two external connections are the two cables for the Anker PowerPort and the switch. The final setup of the RPIs and its connections is as follows: Once you have everything in place, follow the steps to assemble 1x HDMI-on-micro-HDMI cable to connect a screen to an RPI.Three cat6 or cat5 Ethernet cables for connecting the RPIs to the switch:įinally, unless you don’t want to configure via the Ethernet connections, you’ll need: Three USB C to USB A cables for powering the RPIs: SanDisk Ultra 128 GB microSDXC memory card:ĭ-Link GO-SW-8G 8-Port Gigabit switch to hard-wire the RPIs via Ethernet cables: Three Raspberry Pi 4 Model B 4GB, ARM-Cortex-A72 4x 1.50GHz (from now on RPI):Ī rack for the RPIs, Jun_Electronic Gray Stackable Case: Install the Operating System on the SD cards.Kube-rpi Kubernetes on Raspberry Pi 4b with 64-bit OS from scratch
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |